Early edition: some topics are still in progress. Every fact links to an official source.
Stay-Go Guide

Home / Topics / Water

Water · How-to

How to clean and fill water storage containers

A clean container keeps stored water safe for months.

Safety numbers are quoted, not invented. Every dose, time, temperature, and ratio on this page is copied from the agency named beside it. Where agencies differ, we show each one with its source instead of picking. If your local health department or officials give different instructions, follow them.

Choose the container

Clean and sanitize: CDC method

  1. Wash the container with soap and rinse it completely with water.
  2. Sanitize it with a solution of 1 teaspoon of unscented liquid household chlorine bleach (5%–9% sodium hypochlorite) mixed into 1 quart (4 cups) of water.
  3. Cover the container tightly and shake it well so the solution touches every inside surface.
  4. Wait at least 30 seconds, then pour the solution out.
  5. Let the empty container air-dry.
  6. Pour in clean water and cover it with a tight lid.[2]

How other official sources say it

The contact times differ: CDC says wait at least 30 seconds, and Be Ready Utah says at least 30 minutes. Waiting 30 minutes satisfies both.

Fill, label, store

Sources

  1. FEMA / Ready.gov: Water
  2. CDC: How to Create an Emergency Water Supply
  3. Utah DEM / Be Ready Utah: Water (12 Areas)

Official pages checked 14 November 2026. Guidance changes; follow your local officials first. How we research.

Page checked on · Change log · Report an error · Calm by design